Specification Sheet

S19-125SBF, S19-125SFMBF
Barrier-Free Recessed Drench Shower
© 2018 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 3 10/22/2018
This information is subject to change without notice.
Bradley_DrenchShower_S19-125SBF_SFMBF
www
.bradleycorp.com
PUSH
TO
ACTIVA
TE
SHOWER
• Exceeds American National Standard Z358.1 Specifications
• Sturdy One-Piece Cabinet for Quick and Easy Installation
• Full, One-Year Warranty
• SpinTec
™
showerheads are covered by one or more of the following patents: 8113446;
D594,089; D669,555; 8,490,895; Reg. Comm. Des. D001079560-0001. Other
patents pending.
• Classified by Underwriters Laboratory Inc. to ANSI Z358.1
Specifications
Barrier-free design makes this shower and eyewash fully accessible to people with
physical disabilities. This unit is designed to accommodate areas where space
considerations are a concern. Such areas may include, but are not limited to,
laboratories, hospitals, and schools. This ensures no obstructions protrude from the
wall at any time. Shower valve activates when handle is pushed downward. No tight
pinching or grasping is required to activate. Showerhead is designed for varying
water supply pressures of 30–90 PSI ensures a minimum flow of 20 GPM for ANSI
compliance.
ANSI Z358.1 compliant drench showers are mounted between 82"–96"
from the lower edge of the showerhead or shroud to the floor.
This plumbing fixture is not intended to dispense water for human
consumption through drinking or for preparation of food or beverages.
NOTE: Models are shown
mounted in a wall.
1" IPS piping is
supplied by others.
Existing
Wall
Existing
Ceiling
Model Description
 S19-125SBF Barrier-Free Recessed Drench Shower with Surface-Mounted
Handle (Cover Plate Included) and Extended Showerhead
 S19-125SFMBF Barrier-Free Recessed Drench Shower with Surface-Mounted
Handle (Cover Plate Included) and Flush-Mounted
Showerhead
 S19-2150 Navigator EFX20 - Emergency Thermostatic Mixing Valve
®
Standard Equipment
Cabinet and Optional Cover Plate
Stainless Steel. Optional cover plate for models with surface-mounted handle.
SpinTec™ Showerhead
3.1" (78.7mm) diameter highly visible yellow impact-resistant plastic with optional
10¾" (273mm) diameter corrosion-resistant stainless steel shroud. SpinTec drench
showerhead features integral 22 GPM (83.3 L) flow control, conserving water and
helping to accurately size your tepid water system.
SpinTec Flow Rate vs Inlet Pressure at Fixture
0
5
10
15
20
25
30
35
40
10 20 30 40 50 60 70 80 90
Inlet pressure at Fixture (psig)
Flow Rate (gpm)
Shower Valve
Chrome-plated brass 1" NPT stay-open ball valve. Hand operated by a black powder-
coated stainless steel handle when pushed downward.
Pipe and Fittings
1" brass and copper components.
Water Supply
1" NPT. Piping is supplied by others.
Installation
A rough wall opening of 6"W x 10"H x 4"D is required for Models S19-125SBF and
S19-125SFMBF.
Tepid Water Options
Navigator S19-2150 EFX20
Emergency Themostatic Mixing Valve
Keltech SNA-Series
Tankless Water Heater
Satisfies ANSI/ISEA Z358.1 tepid water requirements.