Specification Sheet

S19-120T
Chrome-Plated Brass Drench Shower w/Horizontal Supply
© 2018 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 2 10/22/2018
This information is subject to change without notice.
Bradley_DrenchShower_S19-120T
• Exceeds American National Standard Z358.1 Specifications
• Bright Mirror Finish
• Chrome-Plated Red Brass Pipe and Fittings
• Universal Identification Sign and Inspection Tag Included
• Full, One-Year Warranty
• SpinTec
™
showerheads are covered by one or more of the following patents: 8113446;
D594,089; D669,555; Reg. Comm. Des. D001079560-0001. Other patents pending.
• Classified by Underwriters Laboratory Inc. to ANSI Z358.1
Specifications
Impact-resistant plastic showerhead with corrosion-resistant stainless steel shroud.
Bright mirror finish is superior for labratory use where appearance is important. Shower
pull rod is stainless steel. Pipe and fittings are chrome-plated red brass. Shower
provides a superior washdown with a more even spray pattern.
Drench shower is designed to accommodate standard 8' ceiling
height. ANSI Z358.1 compliant drench showers are mounted between
82"–96" from the lower edge of the showerhead or shroud to the floor.
This plumbing fixture is not intended to dispense water for human
consumption through drinking or for preparation of food or beverages.
®
Model Description
 S19-120T Chrome-Plated Brass Drench Shower w/Horizontal Supply
 S19-2150 Navigator EFX20 - Emergency Thermostatic Mixing Valve
Tepid Water Options
Navigator S19-2150 EFX20
Emergency Themostatic Mixing Valve
Keltech SNA-Series
Tankless Water Heater
Satisfies ANSI/ISEA Z358.1 tepid water requirements.