Specification Sheet

S19-120HFP
Frost-Proof Wall-Mounted Drench Shower
© 2018 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 2 of 2 10/22/2018
This information is subject to change without notice.
Bradley_DrenchShower_S19-120HFP
24"
(610mm)
4" (102mm)
minimum will
increase with
change in wall
thickness
2
5
⁄8"
(67mm)
84"
(2134mm)
to Floor
Ø 3.1"
(78.7mm)
3½"
(89mm)
4½"
(114mm)
6¼"
(159mm)
1¾"
(44mm)
Ø 1" (25mm)
Hole
36"
(914mm)
to Floor
Ø 1
3
⁄8" (35mm) Hole
S19-120HFP8
(0"−8" wall)
S19-120HFP12
(8"−12" wall)
S19-120HFP18
(12"−18" wall)
Standard Equipment
SpinTec™ Showerhead
3.1" (78.7mm) diameter highly visible yellow impact-resistant plastic
for high visibility in emergency situations. SpinTec drench showerhead
features integral 22 GPM (83.3 L) flow control, conserving water and
helping to accurately size your tepid water system.
Frost-Proof Shower Valve
Chrome-plated brass 1" NPT stay-open valve. Hand operated by a
stainless steel push handle. Standard depth 36" (914mm). Special order
for other bury depths (18", 48", 60", 72").
Special order depths are non-returnable.
Pipe and Fittings
1" galvanized steel with BradTect
®
safety yellow coating. Standard wall
thickness is 8"–12". Special order for other wall thicknesses. (0"–8" or
12"–18").
Water Supply
1" NPT.
SpinTec Flow Rate vs Inlet Pressure at Fixture
0
5
10
15
20
25
30
35
40
10 20 30 40 50 60 70 80 90
Inlet pressure at Fixture (psig)
Flow Rate (gpm)
All dimensions assume standard thread engagement. Variations
in manufacturing allow for +/-
1
⁄8" (3mm) per threaded joint.
To find the tolerance of a dimension, add the number of thread
joints in between a dimension and multiply it by
1
⁄8" (3mm).