Specification Sheet

S19-110BF, S19-110BFSS
Freestanding Drench Shower
© 2018 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 2 10/11/2018
This information is subject to change without notice.
Bradley_DrenchShower_S19-110BF_BFSS
• Exceeds American National Standard Z358.1 Specifications
• Exceeds Australia/New Zealand AS4775 & AS/NZS 4020
• Galvanized Steel Protected with BradTect
®
Safety Yellow Coating or All Stainless Steel
(S19-110BFSS)
• Universal Identification Sign and Inspection Tag Included
• Full, One-Year Warranty
• SpinTec
™
showerheads are covered by one or more of the following patents: 8113446;
D594,089; D669,555; Reg. Comm. Des. D001079560-0001. Other patents pending.
• Classified by Underwriters Laboratory Inc. to ANSI Z358.1
• Certified by IAPMO OCEANA to AS4775 and AS/NZS 4020
Specifications
Designed for locations where wall-mounted showers are impractical. Shower provides a
superior washdown with a more even spray pattern when the operating handle is pulled.
This plumbing fixture is not intended to dispense water for human
consumption through drinking or for preparation of food or beverages.
Standard Equipment
SpinTec™ Showerhead
Standard showerhead is 3.1" (78.7mm) diameter highly visible yellow impact-resistant
plastic. High performance corrosion-resistant stainless steel showerhead measures 1½"
(38mm) in diameter (S19-110BFSS). SpinTec drench showerhead features integral 22 GPM
(83.3 L) flow control, conserving water and helping to accurately size your tepid water system.
®
Model S19-110BF
Model S19-110BFSS
Model Description
 S19-110BF Freestanding Drench Shower (barrier-free model)
 S19-110BFSS Freestanding Drench Shower (barrier-free model), All Stainless Steel
 S19-110BFSSZ Freestanding Drench Shower (barrier-free model), All Stainless Steel w/
BSPP Connection/Certified to AS4775 & AS4020
 S19-2150 Navigator EFX20 - Emergency Thermostatic Mixing Valve
SpinTec Flow Rate vs Inlet Pressure at Fixture
0
5
10
15
20
25
30
35
40
10 20 30 40 50 60 70 80 90
Inlet pressure at Fixture (psig)
Flow Rate (gpm)
Valve
Chrome-plated brass 1" NPT stay-open ball valve, operated by stainless steel pull rod with
triangular handle. Model S19-110BFSS is all stainless steel.
Pipe and Fittings
1¼" galvanized steel with BradTect
®
safety yellow coating. S19-110BFSS is all stainless steel.
Water Supply
1¼" NPT (BSPP model only)
Tepid Water Options
Navigator S19-2150 EFX20
Emergency Themostatic Mixing Valve
Keltech SNA-Series
Tankless Water Heater
Satisfies ANSI/ISEA Z358.1 tepid water requirements.