Installation manual

Installation SS-3N/AST/STD, SS-3N/AST/WH
Bradley Corporation • 215-1494 Rev. E; ECN 07-814 12/11/07 9
6
Optional Electric Tankless Water Heater
5
Install the Drains
To Drain
Stub-Out
240/208 or 277 voltage is required for hot water heater.
Refer to the installation manual provided with the hot
water heater for further installation information.
Connect the 1/2" flexible
hose from the cold water
supply stub-out to the hot
water heater inlet.
B
Connect the 1/2" flexible
hose from the hot water
heater outlet to the supply
inlet on the solenoid valve
assembly.
C
Hang the water heater
on the right side frame
member.
A