Installation manual

Express
®
Crescent
®
Lavatory System CRS-Series
Installation CRS-2/IR, CRS-3/IR
Bradley Corporation • 215-1330 Rev. M; ECN 11-08-011 11-15-2011 9
Installation Instructions continued . . .
Step 9: Install the Optional Soap Dispenser
For Express
®
Crescent
®
Lavatory System units with optional soap dispensers, see 215-1583.
Step 10: Install the top cover
1. Carefully place the top cover on top of the lavatory system bowl.
2. Install the threaded rods into the holes on the bottom of the top cover (see Figure 3 on page 5).
3. Slide the anchor plate onto the threaded rods and secure anchor plate against bowl using the wing nuts
provided.
4. OPTIONAL SOAP DISPENSER: Install soap filler assembly in mounting bracket previously installed.
Tighten the optional soap filler cap nut with a spanner wrench.