Installation manual

Express
®
Deck Lavatory System EXD-Series
EXD-2N Installation
8 3/2/2012 Bradley Corporation • 215-1542 Rev. F; ECN 11-08-011
Installation Instructions continued . . .
Step 4: Connecting supply and drain
1. Connect the Navigator
®
ThermostaticMixingValveasshowninFigure5a.
2.Installthedrainpluginthedrainholeinthebowl(seeFigure5b).
3.Beneaththebowl,installthe1/8”rubberwasherandthethreadedtailpieceontothe
drain plug.
4.AssembletheP-trapbyconnectingthe1-1/2”tubularpipetothetailpieceandtothe
1-1/2”drainpipestubbedoutofthewall(seeFigure5c).
5.Installthestraineronthedrainplugopeninginsidethebowlusingthe#8screw.
Figure 5c
Figure 5a
Figure 5b
Cold Supply
Hot Supply
½" NPT
(269-653)
Stop Valve
(S27-340)
½" Flexible Hose
(269-2053)
Navigator® Valve
(S01-526)
#8Screw
(160-447)
NavigatorBracket
(140-1041)
Strainer
#8Screw
Bowl
Drain Plug
Tailpiece
1
⁄8" Rubber
Washer
Frame (Front)
P-Trap
Strainer
Tailpiece
45°