Specification Sheet

S19314 Series
Combination Drench Shower and Halo™ Eyewash or Eye/Face Wash
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 2 of 5 5/19/2014
This information is subject to change without notice.
Bradley_SafetyCombi_S19314Series
Pipe and Fittings
1¼" piping assembly manufactured of one of the following materials:
• Galvanized steel with BradTect
®
safety yellow coating
• Type 304 corrosion resistant stainless steel
• Type 316 corrosion-resistant stainless steel
• Chrome plated red brass.
Ball Valve
1" shower ball valve and ½" stay-open eye and eye/face wash valve manufactured of the
following materials and supplied with either type 304 or 316 stainless steel pull rod and
handle:
• Chrome-plated brass
• Type 316 stainless steel
• Self-closing shower valve and stay-open eyewash ball valve.
Self-closing shower valve may not meet local requirements for shower
activation.
SpinTec™ Showerhead
Standard showerhead is 3.1" (78.7mm) diameter highly visible yellow impact-resistant
plastic. Optional 10" (254mm) diameter yellow impact-resistant plastic or 10¾"
(273mm) diameter corrosion-resistant stainless steel shroud. High performance Type
304 or Type 316 corrosion-resistant stainless steel showerhead measures 1½" (38mm)
in diameter. SpinTec drench showerhead features integral 22 GPM (83.3 L) flow control
(exceeds minimum water flow of 20 GPM (75.7L) at 30 PSI (2.0 bar)), conserving water
and helping to accurately size your tepid water system.
Eyewash
The Halo eyewash system offers a high performance rinsing platform that provides rapid
relief to an individual’s eyes that have been injured by chemicals or particulate. The
eyewash includes an integral 5.1 GPM (19.2 L) flow control, providing water at a safe
velocity while maintaining its effectiveness (exceeds minimum water flow of 0.4 GPM
(1.5 L) at 30 PSI (2.0 bar)). The eyewash is protected by flip open dust covers that open
when the product is activated or by a full bowl dust cover that activates the unit when it is
opened. Safe, steady water flow under varying water supply conditions from 30–90 PSI
(2.0-6.1 bar) is assured by integral flow control in the sprayhead assembly.
Eye/Face Wash
The Halo eye/face wash system offers a high performance rinsing platform that provides
rapid relief to an individual’s eyes and face that have been injured by chemicals or
particulate. This system provides the most complete face wash available in the market.
The eye/face wash includes an integral 5.1 GPM (19.2 L) flow control, providing water
at a safe velocity while maintaining its effectiveness (exceeds minimum water flow of
3.0 GPM (11.4 L) at 30 PSI (2.0 bar)). The eye/face wash is protected by flip open dust
covers that open when the product is activated or by a full bowl dust cover that activates
the unit when it is opened. Safe, steady water flow under varying water supply conditions
from 30–90 PSI (2.0-6.1 bar) is assured by integral flow control in the sprayhead
assembly. Sprayheads are made from an impact resistant ABS plastic or from durable
304/316 stainless steel with electro-polished finish.
Bowl and Dust Cover
Bowl is constructed of yellow impact-resistant plastic, Type 304 corrosion-resistant
stainless steel or Type 316 corrosion-resistant stainless steel. Optional dust cover is
constructed of transparent yellow impact-resistant plastic, Type 304 corrosion-resistant
stainless steel or Type 316 corrosion-resistant stainless steel.
Activation
Type 304 Stainless steel push handle with optional aluminum or type 304 stainless steel
foot pedal. Type 316 stainless steel push handle with optional Type 316 stainless steel
foot pedal.
Drench Hose
Perforated sprayhead with protective sprayhead cover is ABS plastic and provides soft
spray for cleansing eyes and face. Chrome-plated brass valve with extended handle
stays open once handle is squeezed. 8' (2438mm) yellow reinforced thermoplastic hose
has
3
⁄8" NPT male thread. Burst strength is 450 PSI (31 bar). Attachment Kit includes ½"
NPT supply, fittings and hanger for attaching hose to eyewashes or drench showers. The
sprayhead contains an antimicrobial agent to protect the sprayhead.
Backflow Prevention
Series N9 dual-check backflow preventer has a chrome-nickel plated brass body and
includes atmospheric vent for continuous pressure applications. The check valve comes
with
3
⁄8" female dual NPT female inlet and outlet connections. It can sustain a maximum
pressure of 125 PSI (8.6 bars). The check valve is certified to CSA B64.8.
Series 9D dual-check backflow preventer with intermediate atmospheric vent can be
used under continuous pressure. The primary check valve uses a rubber disc seating
adjacent to a mating rubber part to ensure tight closing. A second check valve employs
a rubber disc-to-metal seating.
SpinTec Flow Rate vs Inlet Pressure at Fixture
0
5
10
15
20
25
30
35
40
10 20 30 40 50 60 70 80 90
Inlet pressure at Fixture (psig)
Flow Rate (gpm)