Specification Sheet

9943, 9944, 9945, 9946
Hat and Coat Rack
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 1 2/20/2013
This information is subject to change without notice.
Bradley_CoatRack_9943_44_45_46
Model 9943 – 3 Hooks Bradex
®
Model 9944 – 4 Hooks
Model 9945 – 5 Hooks
Model 9946 – 6 Hooks
Product Materials
BACKPLATE: 22 gauge stainless steel with exposed
surfaces in architectural satin finish. Backplate is open
through the center and does not have end caps.
HOOKS: 14 gauge stainless steel
Installation
Verify all rough-in dimensions prior to installation. Secure
to wall with mounting screws (included) at holes provided.
Guide Specification
Surface-mounted hat and coat rack shall be fabricated of
22 gauge stainless steel in satin finish. Hooks shall be of
14 gauge stainless steel.
Dim. “A”
Dim. “B”
7¼"
(184mm)
3"
(76mm)
2
5
⁄8"
(67mm)
Mounting Holes
Dim. “C”
Dimensions
Model No. Dim. “A” Dim. “B” Dim. “C” Hooks
9943 24" (610 mm) 9" (229 mm) 3" (76 mm) 3
9944 36" (914 mm) 10" (254 mm) 3" (76 mm) 4
9945 48" (1219 mm) 11" (279 mm) 2" (51 mm) 5
9946 60" (1524 mm) 10¾" (273 mm) 3¼" (83 mm) 6
MODEL 9944 SHOWN