Installation Sheet

Installation Instructions

P.O. Box 309, Menomonee Falls, Wi 53052-0309

TEL. 1-800-BRADLEY FAX 262-251-5817

http://www.bradleycorp.com

P20-155; EN 03-1584

Page 1 of 1 10/24/03

9334/9335 Towel Ring

IMPORTANT: Notches on the ring and escutcheon must be correctly aligned for a

successful installation. Refer to the illustration below when installing

the towel ring.

1. Hold the ring straight out, perpendicular to the escutcheon as shown. Align the two notches on

each side of the ring with the two key slots on each side of the escutcheon. Center the ring

(through the slots) on the escutcheon.

2. Drop the ring down 90° and the ring will lock into place.

3. Secure the mounting bracket to the wall with the screws provided.

4. With the set screw at the bottom, align the top end of the escutcheon to the top of the mounting

bracket. Gently push the escutcheon plate down into position and tighten the concealed set screw

to lock the unit into place.

(51mm)

4-3/8"

(111mm)

(51mm)

4-7/8"

(124mm)

2-3/8"

(60mm)

Mounting

bracket

and

screws

Set

Screw

Notches

in ring

Key slot in

escutcheon

Set screw

Escutcheon

After the notches are

properly aligned, drop the

ring down 90° to lock into

place.

PAGE 1
Installation Instructions 9334/9335 Towel Ring IMPORTANT: Notches on the ring and escutcheon must be correctly aligned for a successful installation. Refer to the illustration below when installing the towel ring. 1. Hold the ring straight out, perpendicular to the escutcheon as shown. Align the two notches on each side of the ring with the two key slots on each side of the escutcheon. Center the ring (through the slots) on the escutcheon. 2. Drop the ring down 90° and the ring will lock into place. 3.