Specification Sheet

740
Fixed Tilt Mirror
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 12/19/2012
This information is subject to change without notice.
Bradley_Mirror_740
Fix tilt mirror with welded corners:
 Standard Model 740-1830 (18" x 30") Bradex
®
 Standard Model 740-1836 (18" x 36") Bradex
®
 Standard Model 740-2436 (24" x 36") Bradex
®
 Model 740-XXXX (Specify width and height)
Product Materials
FRAME: 20 gauge stainless steel, corners welded and ground smooth to satin finish. 20
gauge angle stiffeners welded to frame provide additional rigidity.
BACK: galvanized steel, secured to frame with con cealed screws equipped with integral
horizontal hanging brackets.
MIRROR: first quality ¼" float glass, thermosetting infrared-cured paint backing with
Poly-Glaze protective finish. Manufactured in accordance with ASTM C 1036 and ASTM
C 1503. The back of the mirror is protected by a wedge of extruded polystyrene, which is
placed between the mirror and the galvanized steel.
WALL HANGER: 18 gauge cold-rolled steel, all welded con struc tion to form rigid
template.
Optional Features
Features Suffix

¼" tempered glass mirror in lieu of polished float glass mirror* -2

Laminate glass -3

Highly polished No. 8 architectural finish, 20 gauge stainless steel in lieu
of polished float glass mirror
-4

Bright annealed 20 gauge stainless steel in lieu of polished float glass
mirror
-5

Plexiglas
®
-6
* Either the Length (L) or the Width (W) must be greater than 25".
An inherent characteristic of a manufacturing process for tempered glass is distortion
which may vary from mirror to mirror.
Stainless steel mirrors will differ in optic quality from glass mirrors.
In larger sizes, stainless mirrors are subject to distortion and/or "oil canning" for
which Bradley Corporation cannot accept responsibility.
Bradley mirrors are not field interchangeable from horizontal to vertical or vice versa.
Always specify width first.
Installation
Verify all rough-in dimensions prior to installation. Secure concealed mounting bracket
to wall with screws (not included) at holes provided. Provide in-wall backing at mounting
screw locations. Po si tion mirror over mounting bracket to engage hanger tabs. Slide
mirror down and lock into position.
Guide Specification
Fixed tilt mirror shall be framed with 20 gauge stainless steel with
20 gauge concealed stiffeners. Welded corners shall be polished to
a uniform satin finish. Mirror shall be of first quality ¼" float glass
guaranteed for 15 years against silver spoilage and protected by a
shock-absorbing, waterproof foam filler with Poly-Glaze protective
finish. Back of unit shall be gal va nized steel secured to frame
with concealed screws, equipped with integral horizontal hanging
brackets and separate wall hanger for concealed mount ing.
Fixed Tilt Framed Mirror shall be Bradley Model
740-______" W x______" H (specify width and height).
ADA Compliant
Consult local and national accessibility codes for proper installation
guidelines.
Conformity and compliance to local and national codes is the
responsibility of the installer.