Specification Sheet

5912
Combination Unit
© 2017 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 12/7/2017
This information is subject to change without notice.
Bradley_CombiDispenser_5912_10_11
ADA Compliant
Consult local and national accessibility codes for proper installation
guidelines.
Conformity and compliance to local and national codes is the
responsibility of the installer.
Note: ADA requires a 1½" grab bar clearance to the wall. When fully recessed,
this unit protrudes ¼" from the finished wall. A standard grab bar, when
mounted over the unit, will not meet the ADA requirement of 1½".
Model 5912 — Recessed Bradex
®
  Model 5912-10 — Semi-Recessed
(recesses 3¼", projects 1¼")
 Model 5912-11 — Surface-Mounted
(projects 4½")
Models 5912-10 and 5912-11 do not allow clearance for
optional grab bar. See inset view shown at right.
Seat Cover and Dual Roll Tissue Dispensers/Waste Receptacle
Product Materials
CABINET: 22 gauge stainless steel with exposed surfaces in architectural satin
finish. Welded construction with burr-free edges.
FLANGE: 22 gauge stainless steel with exposed surfaces in architectural satin
finish. One-piece seamless construction, 1" wide with ¼" return.
DOOR: 18 gauge stainless steel with full-length piano hinge and tumbler lock
keyed like other Bradley units.
PUSH FLAP DOOR: 22 gauge stainless steel with exposed surfaces in
architectural satin finish. Self-closing, with heavy-duty stainless steel piano hinge.
WASTE RECEPTACLE: leakproof molded plastic. 1.0 gal. capacity.
SPINDLE: polyethylene, non-removable by user.
Capacity
Toilet Seat Cover Dispensers — 1,000 standard single-fold or half-fold toilet seat
covers; Toilet Tissue Dispensers — two standard core toilet tissue rolls through
5¼" in diameter. Box of 500 waxed paper napkin disposal liners are available by
ordering part number P11-022.
Operation
Hinged access door permits servicing of components from one side.
Installation
Verify all rough-in dimensions prior to installation. Requires rough wall opening
15
3
⁄8"W x 28
7
⁄8"H x 4¼"D. Secure with mounting screws (in clud ed) at holes
provided. Recessed unit allows clearance for grab bar (not included) across front
of unit. Surface-mounted unit utilizes one piece door; does not allow clearance
for grab bar. 5900 Series Combination units are to be installed so that door opens
90° to fill product and maintain waste container.
Guide Specification
Recessed combination unit shall include toilet seat cover dispenser, toilet tissue
dispenser, and napkin disposal, and be fabricated of heavy gauge stainless steel
with seamless exposed sur fac es in satin finish. Door and back panel shall be 18
gauge. Door shall have piano hinge and tumbler lock.
Overall dimensions: 17
1
⁄8"W x 30
5
⁄8"H x 4½"D.