Installation Sheet

T ECH D ETAILS
JBR30703 2/03
Page 2 of 2
Continued Page 2
Troubleshooting Napkin/Tampon Vendors
Tampon Jam Problems
Operation: Napkins are dispensed by a rotor with teeth on two
sides. With each turn of the coin mechanism the rotor makes ½
turn and dispenses a tampon.
Problem:
From time to time product may jam due to over filling,
wrong size product, damaged tube or other reasons. When product
does jam, users will try to force the handle on the coin mechanism
to get the product out. This may eventually cause the coin
mechanism to wear and turn hard or it may not turn at all.
Remedy:
Remove the coin mounting plate assembly (Fig. 5).
Test the coin mechanism without any load.
1.) If the coin mechanism turns hard, check to make sure the rotor
teeth are not hitting the guide plate. If the teeth are hitting the
guide plate, bend plate back to clear the rotor teeth or file the rotor
teeth to clear the guide plate. Replace rotor if damaged. See Fig. 6.
Rotor part number: P10-524
2.) If there is no interference of the rotor and the coin mechanism
still turns hard, it has worn inside and should be replaced.
See part numbers on previous page.
3.) If the coin mechanism turns freely without any load, look for
problems in the cabinet. Inspect the tampon guide rails to make
sure they are not bent and are evenly spaced. Only slight tweaking
may be necessary to re-align the rails. See Fig. 7.
Coin mounting plate assembly
Front View
Fig. 5
Loosen 2 screws to remove.
Back View
Fig. 6
Rotor
Guide plate
Teeth
Fig. 7
Guide rails
Note: It is necessary to use the t
ampon
weight assembly (S01-499) in order for
the product to dispense properly.
Other Napkin/Tampon Dispenser Parts
Part No. Description
P10-526 Key for door
P10-558 Lock for door
P10-548 Key for coin box
P10-519 Lock for coin box
A18-037 Coin box cover & lock assy.
S01-370 Coin box cover & lock assy. (pre 1993)
P20-039 Maintenance and loading instructions
P20-039A
Maintenance and loading instructions (402 & 427)
P20-034 Label - Free
P20-035 Label - 5¢
P20-036 Label - 10¢
P20-037 Label - 25¢
P20-078 Label - 50¢
P20-117 Label - $1.00
Coin Mounting Plate Assy. for Models 402 & 427
S01-361040 Free
S01-361041 5¢
S01-361042 10¢
S01-361045 25¢
S01-361043 50¢
S01-361044 $1.00