Installation / Operation Instruction Manual

21
THERMOSTAT ADJUSTMENT - Honeywell gas control
160°F (71.1°C) Control (Taupe / Silver Faceplate)
Figure 4
The thermostat dial is set to its lowest temperature setting when shipped from the
factory. Remember that lower temperature settings are more energy efficient. Adjust
the temperature by turning the thermostat dial. It is suggested that the starting point
setting not be greater than the “HOT” mark on the thermostat dial (approximately 120°F
[48.9°C]) as indicated above. Rotate the thermostat dial counter-clockwise
to
decrease the temperature setting. Rotate the thermostat dial clockwise
to
increase the temperature setting. Adjust the dial until the minimum acceptable
temperature is achieved (See figure 4 above for approximate temperature settings).
180°F (82.2°C) Control (Dark (Battleship) Grey Faceplate)
Figure 5
The thermostat dial is set to its lowest temperature setting when shipped from the factory.
Remember that lower temperature settings are more energy efficient. Adjust the
temperature by turning the thermostat dial. It is suggested that the starting point setting not be
greater than the “HOT” mark on the thermostat dial (approximately 120°F [48.9°C]) as
indicated above. Rotate the thermostat dial counter-clockwise
to decrease the
temperature setting. Rotate the thermostat dial clockwise to increase the
temperature setting. Adjust the dial until the minimum acceptable temperature is achieved
(See figure 5 above for approximate temperature settings).
WHITE
WIRE
RED
WIRE
WHITE
WIRE
RED
WIRE