Spec Sheet

©2021, Bradford White Corporation, USA. All rights reserved.
Sales: 800-523-2931
n
Fax 215-641-1612
24/7 Technical Support: 800-334-3393
n
Email techserv
@
bradfordwhite.com
Products made by Bradford White are manufactured in the United States using the finest raw materials and components from around the world.
Single Wall Models
Meet or exceed ASHRAE 90.1b (current standard)
Model
Number
Approx.
Shipping
Weight
lbs.
A
Floor to
Top of
Heater
in.
C
Floor to
T&P
Conn.
in.
B
Jacket
Dia.
in.
Nominal
Gal.
Capacity
SW-65C-5
SW-80C-5
SW-120C-5
U.S.
Gal.
54
67
107
Imp.
Gal.
45
56
89
59
1
/
4
59
62
1
/
2
53
1
/
8
52
7
/
8
55
3
/
4
273
300
422
22
24
28
1
/
4
E
Floor to
Exchanger
Outlet
in.
5
3
/
8
5
3
/
8
6
3
/
8
47
3
/
4
47
3
/
4
48
3
/
4
60
59
3
/
4
63
1
/
4
D
Floor to
Water
Conn.
in.
Model
Number
Approx.
Shipping
Weight
kg.
A
Floor to
Top of
Heater
mm.
C
Floor to
T&P
Conn.
mm.
B
Jacket
Dia.
mm.
Nominal
Liter
Capacity
SW-65C-5
SW-80C-5
SW-120C-5
Liters
204
254
405
1505
1499
1588
1349
1343
1416
124
136
191
559
610
718
E
Floor to
Exchanger
Outlet
mm.
137
137
162
F
Floor to
Exchanger
Inlet
in.
F
Floor to
Exchanger
Inlet
mm.
1213
1213
1238
11
1
/
2
11
1
/
2
11
1
/
2
G
Floor to
Aquastat
in.
G
Floor to
Aquastat
mm.
292
292
292
8
8
8
J
C/L of
Water
Conn.
in.
J
C/L of
Water
Conn.
mm.
203
203
203
1
1
1
M
Water
Conn.
NPT
in.
M
Water
Conn.
NPT
mm.
25
25
25
1524
1518
1607
D
Floor to
Water
Conn.
mm.
Commercial PowerStor Series
®
Indirect Water Heater
General
All units are certified at 300 PSI (2068 kPa) test pressure and 150 PSI (1034 kPa) working pressure. All potable water connections are 1" NPT (25mm) on 8"
(203mm) centers.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable side of this system. The potable side may NEVER be
connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
These certified ratings were obtained with a heat source output
rate and flow rate as specified and a 180°F (82°C) boiler water
supply temperature. Other results will be obtained under different
conditions.
Model
Number
AHRI Certified Water Heater Ratings
SW-65C-5
SW-80C-5
SW-120C-5
140°F 115°F
First Hour
Delivery
@ 135°F
(Gal.)
370
380
400
Continuous
Draw Rating
@ 135°F
(Gal./Hr.)
Approximate Boiler
Output Needed
For Ratings
(BTU/Hr.)
335
335
325
Standby
Heat Loss
Rating
(°F/Hr.)
0.7
0.6
0.4
Minimum
Heat Source
Flow Rate
(Gal./Min.)
14.0
14.0
14.0
Minimum
Output Rate
of Heat Source
(BTU/Hr.)
225,000
225,000
220,000
55,000
55,000
55,000
55,000
Based on 200°F (93°C) boiler water temperature and 50°F
(10°C) potable water inlet.
Model
Number 140°F 115°F
DOE Water Heater Performance
SW-65C-5
SW-80C-5
SW-120C-5
140°F 115°F
Maximum First
Hour Rating
(Gal.) @
396
408
445
582
594
631
140°F 115°F
Continuous
Draw Rating
(Gal./Min.) @
5.7
5.7
5.7
8.8
8.8
8.8
Approximate
Boiler Output
Needed for
Rating (BTU/Hr.)
Approximate Boiler
Output Needed
For Ratings
(BTU/Hr.)
300,000
300,000
300,000
55,000
55,000
55,000
55,000
D
F
E
G
C
A
B
J
M M
ANODE RODS
(TYPICAL)
POTABLE
CONNECTIONS
(TYPICAL)
Heat Exchanger Head Loss
GPM
5
0.60
8
1.60
10
2.60
12
3.70
14
5.00
Ft. of Hd. Loss
Printed in U.S.A.555-F-1221