Install Instructions

3
CAUTION
The maximum boiler water supply temperature to the indirect heat
exchanger must not exceed 240°F (115°C).
NOTICE
Insulation blankets are not required for this water heater. This
water heater meets or exceeds the ASHRAE/IES 90.1b standards with
respect to insulation and standby loss requirements.
TABLE OF CONTENTS
I- IMPORTANT INFORMATION…………….….. 4
II- SPECIFICATIONS………………………………. 8
III- GENERAL INFORMATION……………………. 12
IV- PRE-INSTALLATION…………………………… 15
V- WATER CONNECTIONS……………………….. 20
VI- ELECTRICAL CONNECTIONS……………….. 25
VII- OPERATING INSTRUCTIONS………………… 26
VIII- MAINTENANCE…………………………………. 29
IX- TROUBLESHOOTING GUIDE………………… 32
X- PARTS LIST………………………………………. 34
NOTES…………………………………………….. 36