Spec Sheet

EcoStor2
™
SC Solar Indirect System
Single Coil Power Vent Gas Backup Models
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;
6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984;
8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS:
2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Defender Safety System
®
, Vitraglas
®
and Hydrojet
®
are registered trademarks of
Bradford White
®
Corporation.
507-B-0914-A
FEATURING:
6 Year Limited Tank Warranty / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
Photo is of
S-DW2-TW-65T6FBN
The EcoStor2
™
Single Coil Defender Safety System
®
Models feature:
■ Backup Low NOx Burner—To activate burner, a thermistor temperature sensor is
located in the upper portion of the tank to promote greater solar operation efficiency.
■ Internal Double Wall Heat Exchanger—1
1
⁄2" O.D. glass coated (Vitraglas
®
) steel coil
ensures separation of potable water and heating fluid.
-- 3/4" NPT Solar Collector Supply and Return Connections.
■ Sensor Wires for Solar Thermistor Connections—Twisted wires are provided
under the Upper and Lower covers (Thermistors and Solar Controller are not
provided).
■ Honeywell Self Diagnostic Electronic Gas Control—Intelligent gas control with
spark to pilot ignition system that eliminates the constant burning pilot. This results
in savings of pilot gas during stand-by periods (120 V.A.C.).
-- Advanced Temperature Control System—Microprocessor constantly monitors
and controls burner operation to maintain accurate water temperature levels.
-- Intelligent Diagnostics—An exclusive green LED light prompts the installer during
start-up and provides ten different diagnostic codes to assist in troubleshooting.
-- Pilot On Indication—Flashing green LED provides positive indication that pilot is
on.
■ Defender Safety System
®
(S-DW2-TW-50 & S-DW2-TW-65 only).
-- Advanced ScreenLok
®
Technology Flame Arrestor Design—Flame arrestor is
designed to prevent ignition of flammable vapor outside of the water heater.
-- Flammable Vapor Sensor—Electronic sensor prevents burner operation if
flammable vapors are detected. The sensor will also prevent operation if there is
ongoing flammable vapor burn inside the combustion chamber.
-- Maintenance Free—No regular cleaning of air inlet openings or flame arrestor is
required under normal conditions.
-- Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
■ Powerful Blower Motor—Our significantly quiet design has greater resistance to
outside winds and the power to vent in many difficult venting situations.
■ Horizontal and Vertical Venting—With 3" or 4" PVC, ABS or CPVC (Maximum
equivalent vent lengths on reverse side).
■ Factory Installed Hydrojet
®
Total Performance System—Cold water inlet sediment
reducing device helps prevent sediment build up in tank and increases first hour
delivery of hot water while minimizing temperature build up in tank.
■ Vitraglas
®
Lining—Bradford White tanks are lined with an exclusively engineered
enamel formula that provides superior tank protection from the highly corrosive
effects of hot water. This formula (Vitraglas
®
) is fused to the steel surface by firing at a
temperature of over 1600°F (871°C).
■ 2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing the
amount of heat loss. This results in less energy consumption, improved operation
efficiencies and jacket rigidity.
■ Water Connections—3⁄4" NPT factory installed true dielectric fittings.
■ Two Protective Anode Rods.
■ T&P Relief Valve—Included.
■ Low Restriction Brass Drain Valve—Durable tamper proof design.
■ Thermostatic Mixing Valve (ASSE Approved)—Included.