Service Manual

Page 26
Figure 18 – Gas Restrictor Diaphragm for Propane Operation
Figure 19 – Gas Conversion Procedure for LPG Operation
For gas restrictor conversion, the manifold doesn’t need to be disassembled. The steps for restrictor
conversion are:
1. Disassemble the gas restrictor seal by removing the 4 screws.
2. If the appliance is working with NG, there is no restrictor inside. If the appliance is working with
LPG, there is a rubber diaphragm with 3 restrictors.
3. Remove the diaphragm if the objective is to convert the appliance from LPG to NG or install the
diaphragm if the objective is to make the conversion from NG to LPG.
26