Service Manual

Page 13
Control Panel Sub-Menus:
To access the sub-menus, simultaneously press the P, Up, and Down buttons for 3 seconds. The
display should default to displaying P4. The available sub-menus are:
Display
Description
P4
Information
P7
Gas Type
P9
Purge
SA
Settings
SL
Temperature Limit
PE
Appliance Type
PF
Bypass
PA
Actuator Calibration
IC
ICC
E
Exit
P0
L2 Gas Adjust
P1
Maximum Power
P2
Minimum Power
UC
Automatic Calibration
P3
Powerbus Address
Table 6 – LCD Sub-Menus
To navigate the sub menus, press the Up or Down buttons. To enter a sub menu, press the P button. If
you would like to exit a sub menu, or the menu all together, navigate the Up or Down buttons until the
display shows E. Press the P button to Exit back to the previous menu, or back to the main display. Holding
the P button for 3 seconds or more will confirm a change. The display will blink while a change is being
saved.
13