Spec Sheet

©2021, Bradford White Corporation, USA. All rights reserved.
Sales: 800-523-2931
n
Fax [phone]
24/7 Technical Support: 800-334-3393
n
Email techserv
@
bradfordwhite.com
Products made by Bradford White are manufactured in the United States using the finest raw materials and components from around the world.
NATURAL GAS
Infiniti
®
K Series Outdoor Model
Model
Number
GPM Flow Rate
at °F
Temperature Rise
RTG-K-160-N2
RTG-K-199-N2
9,000 - 160,000
9,000 - 199,000
45°F
7.0
8.7
Uniform
Energy
Factor
75°F
4.2
5.2
90°F
3.5
4.4
0.92
0.96
Minimum
Water Flow
GPM
0.45
0.45
Maximum
Temperature
Setting
140°F
140°F
Approx.
Shipping
Weight
lbs.
73
79
Model
Number
LPM Flow Rate
at °C
Temperature Rise
RTG-K-160-N2
RTG-K-199-N2
2.6 - 46.64
2.6 - 58.3
25°C
26.7
32.9
Uniform
Energy
Factor
41.7°C
15.9
19.6
50°C
13.2
16.6
0.92
0.96
Minimum
Water Flow
LPM
1.7
1.7
Maximum
Temperature
Setting
60°C
60°C
Approx.
Shipping
Weight
kg.
33
36
Input (BTU/Hr.)
Input (kW)
Infiniti
®
K Series Tankless Water Heater
General
All potable water connections are 3/4" (19mm) NPT. Gas connections are 3/4" (19mm). Bradford White recommends consulting the Installation and Operations
Manual (IOM) for proper gas line sizing based upon the installation specifics.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable side of this system. The potable side may NEVER be
connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
Products made by Bradford White are manufactured in the United States using the finest raw materials and components from around the world.
Propane (LP) Models are not available for order from the factory. All Natural Gas products shipped can be converted to Propane (LP) without the purchase
of an additional kit.
Requires an electrical power supply from a 120VAC 60Hz., properly rated receptacle and must be properly grounded. Power supply cord provided.
Intelligent Cascading Kit:
Part No. 7736502750 (One for each additional water heater).
Printed in U.S.A.1153-F-0821
Condensate
Drain
Hot Water
Outlet
Gas Connection
Cold Water
Inlet Filter
Cold Water
Inlet
Power
Cord
9
13
/
16
"
(
249)
9
13
/
16
"
(249)
(mm)
TOP VIEW
FRONT VIEW
BOTTOM VIEW
SIDE VIEW
18
19
/32" (472)
9
9
/32"(236) 7
1
/2" (191)
31
1
/2"
(
800)
2
1
/2"
(64)
5
23
/64"
(136)
4
5
/16"
(110)
1
9
/16"
(40)
3
1
/2"
(89)
11
19
/32"
(294)
3
1
/2"
(89)
(133)
5
1
/4"
(191)
7
1
/2"