Options & Accessories

6
Installation instructions
Connecting cable – 6 720 887 627 (2018/05)
▶ Disconnect cable from the HMI board.
Fig. 6 Disconnect cable
▶ Remove two Phillips screws from the HMI support base.
Fig. 7 Removing base
▶ Secure the internal cable with a cable tie.
Fig. 8 Secure internal cable
▶ Choose the wire as center to fix the base.
Fig. 9 Wires inside the wall
▶ Remove the detachable surface, when wires are outside
the wall.
Fig. 10 Wires outside the wall
▶ Install fixing base in a wall.
Fig. 11 Installing base
6720882320-10.1V
1.
6720882320-12.1V
6720882320-11.1V
6720882320-06.1V
2.37in
(60mm)