Options & Accessories

(5)

Step 3: Slide the base (item 4) into the grooves on the bottom of the side walls. Then use the

last two (item 6) screws and attach the base to the wall using the holes shown (make

sure that the condensate pipe goes through the hole in the base).

Step 4: Attach the front door (item 5) to the sides by sliding the pins into the slots located in the

side walls. Then rotate the door up while making sure that the walls are in between the

supports welded to the door. Finish attaching the door by screwing the two (item 7)

screws through the pilot holes located in the door and side walls.

(4)

(6)

(7)

Note: These images depict the completed pipe cover.