Service Manual

Page 21
4.3 Condensate Siphon
The appliance includes a condensate siphon which stores condensate generated during operation from
the condensate collector below the stainless-steel condensing heat exchanger. The siphon must also
connect to an adequate PVC drainage pipe (1) to drain the acidic condensate once full. As this unit is a
high-efficiency appliance, condensate flow can be as high as 2 gallons per hour at full power.
Figure 12 – Condensate Siphon
Figure 13 – Disassembling the Condensate Siphon from the Unit
To disassemble the siphon from the metal box and heat cell the necessary steps are the following:
1. Pull the tube between the siphon and the condensate collector.
2. Remove the screws on the bottom of the appliance.
3. Pull the siphon out.
21