Installation Manual

2
Table of contents
6 720 811 758 (2014/05)
Table of contents
1 Key to symbols and safety instructions . . . . . . . . . . . . 2
1.1 Key to symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4 Appliance identification . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Control unit service position . . . . . . . . . . . . . . . . . . . . . 3
6 RTG 199ME Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6.1 Jumper installation . . . . . . . . . . . . . . . . . . . . . . . . . 4
6.2 Software configuration . . . . . . . . . . . . . . . . . . . . . . 4
7 RTG 199HE Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.1 Jumper installation . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.2 Software configuration . . . . . . . . . . . . . . . . . . . . . . 5
1 Key to symbols and safety instructions
1.1 Key to symbols
Warnings
The following keywords are defined and can be used in this
document:
• NOTICE indicates a situation that could result in damage to
property or equipment.
• CAUTION indicates a situation that could result in minor to
medium injury.
• WARNING indicates a situation that could result in severe
injury or death.
• DANGER indicates a situation that will result in severe
injury or death.
Important information
Additional symbols
Warnings in this document are identified by
a warning triangle printed against a grey
background.
Keywords at the start of a warning indicate
the type and seriousness of the ensuing risk
if measures to prevent the risk are not taken.
This symbol indicates important information
where there is no risk to people or property.
Symbol Explanation
▶ Step in an action sequence
 Cross-reference to another part of the document
• List entry
– List entry (second level)
Table 1