Spec Sheet
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821;
7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238;
7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031;
2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas
®
is a registered trademark of Bradford White
®
Corporation.
6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
1107-G-0322
Residential Manufactured Home Direct Vent
Gas Water Heater
The Manufactured Home Models feature:
n Housing and Urban Development—This water heater is designed in
accordance with H.U.D. and is certified for installation in a manufactured
home (mobile home) only and must be installed in an enclosure that will
completely separate the water heater combustion and venting system from
the dwelling interior.
n Sealed Combustion Roof Jack Kit—Ordered separately and includes an
adjustable air intake tube, roof jack and hardware. Must specify roof jack
size when ordering. Available in 12" (305mm), 18"/32" (457/813mm), 32"/60"
(813/1524mm), or 48"/95" (1219/2413mm) lengths.
-- Must order roof jack kit for new installations.
n Flue Baffle—Designed to maximize the amount of heat absorbed in the lower
portion of tank. Minimizes air movement in the heater during standby periods
to decrease heat loss up the flue.
n Heat Traps—Installed on hot water outlet to minimize heat loss through
piping.
n Vitraglas
®
Lining—An exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas
®
) is fused to the steel surface by firing at a temperature of
over 1600°F (871°C).
n Fully Automatic Controls—Fast acting surface-mount thermostat with high
limit energy cut-off (manual reset) for safety.
n Insulation System—2" (51mm) Non-CFC foam insulation covers the
sides and top of the tank, reducing heat loss. This results in less energy
consumption, improved efficiencies, and jacket rigidity.
n Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings
extend water heater life and simplify water line connections.
n Protective Anode Rod—Provides added protection against corrosion for
long-term, trouble-free service.
n T&P Relief Valve—Installed.
n Low Restrictive Brass Drain Valve—Durable tamper proof design.
n Convertible Gas Control—Easily convertible control for use with either
Propane or Natural Gas.
Photo is of
RG2DVMH30T6X