Installation / Operation Instruction Manual

23
Thermostat Adjustment Continued-
Figure 11
The thermostat dial is set to its lowest temperature setting when shipped from
the factory. Remember that lower temperature settings are more energy
efficient. Adjust the temperature by turning the thermostat dial. It is suggested
that the starting point setting not be greater than the ”
“ mark on the
thermostat dial (approximately 120°F [48.9°C]) as pictured above. Rotate the
thermostat dial clockwise
to decrease the temperature setting. Rotate
the thermostat dial counterclockwise
to increase the temperature
setting. Adjust the dial until the minimum acceptable temperature is achieved
(See Figure 11 above for approximate temperature settings).