Submittal Sheet
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419;
7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379;
7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515;
2,476,685; 2,239,007; 2,092,105; 2,107,012. Defender Safety System
®
, Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
Residential eF Series
®
Power Direct Vent
Gas Water Heater
The eF Series
®
Power Direct Vent Model Features:
n ENERGY STAR
®
Qualified—Meets or exceeds requirements for ENERGY STAR
®
per the latest
ENERGY STAR
®
criteria revision, as well as most utility rebate programs.
n Vertical, Dual-pass Heat Exchanger System—Highly efficient, helical-finned 5" (127mm) primary
heat exchanger tube and three, stainless steel baffled, 2" (51mm) secondary heat exchanger tubes.
-- Vertical design eliminates corrosion protection challenges of condensing water heaters that utilize
less durable heat exchanger designs.
n Bradford White ICON System
®
—Intelligent gas control with spark to pilot ignition system eliminates
the constant burning pilot. This results in savings of pilot gas during standby periods (120 VAC).
-- Enhanced Performance—Proprietary algorithms provide enhanced First Hour Rating and tighter
temperature differential.
-- Advanced Temperature Control System—Microprocessor constantly monitors and controls
burner operation to maintain consistent and accurate water temperature levels.
-- Intelligent Diagnostics—An exclusive green LED light prompts the installer during start-up and
provides ten different diagnostic codes to assist in troubleshooting.
-- Pilot On Indication—Flashing green LED provides positive indication that pilot is on.
-- Separate Immersed Thermowell—High-strength advanced polymer composite thermowell
provides isolation between electric temperature sensor and surrounding water. No need to drain the
tank when removing gas valve.
n Closed Combustion Venting System—Power Direct Vent models are ideal for installations which
lack sufficient air for combustion, such as new construction homes or additions which are tightly
insulated. These models use a twin pipe system where combustion air is drawn from outside the
building in one pipe, and combustion products are expelled to the outside in another pipe.
n Cast Aluminum Air Intake Boot—A cast molded air intake boot design provides exceptional
durability during installation and operation.
n Flexible Venting—The eF Series
®
can be installed as a power direct vent or power vent. If power
direct vent, they can be balanced or unbalanced and terminate on different walls or pressure zones.
-- Horizontal and Vertical Venting—PVC, ABS, or CPVC. The equivalent feet of intake venting
cannot be greater than the equivalent feet of exhaust venting.
-- Optional Concentric Vent Kit Termination—Termination fitting provides for only one exit
opening through a wall or roof. (Subtract 10ft. (3m) for intake pipe and 10ft. (3m) for exhaust pipe
when calculating total vent length.)
n Factory-Installed Hydrojet
®
Total Performance System—Sediment reducing device that also
increases first hour rating of hot water while minimizing temperature build-up in tank.
n Vitraglas
®
Lining—An exclusively engineered enamel formula that provides superior tank protection
from the highly corrosive effects of hot water. This formula (Vitraglas
®
) is fused to the steel surface by
firing at a temperature of over 1600°F (871°C).
n Insulation System—2" (51mm) Non-CFC foam insulation covers the sides and top of the tank,
reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
n Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings extend water heater
life and simplify water line connections.
n Side Connections—3/4" (19mm) NPT tappings allow easy connections for space heating
applications (Potable water only).
n Factory Installed Heat Traps—Design incorporates a flexible disk that reduces heat loss in piping
and eliminates the potential for noise generation.
n Two Protective Anode Rods.
n T&P Relief Valve—Installed.
n Low Restrictive Brass Drain Valve—Durable tamper proof design.
n NOx Emissions—Less than 40 ng/J.
6 or 10-Year Limited Tank Warranties / 6 or 10- Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
Photo is of
RC2PDV50H6N
1264-F-0321
FEATURING: