Manualshelf

Spec Sheet

ManualsBrandsBradford White ManualsIndirect1. PowerStor Series ® Single Wall Indirect (SW-2) - Residential
12
Residential Energy Saver
PowerCor
®
Indirect-Fired
Water Heater
Features:
Bradford White is ISO registered to the
9001 standard.
■ 2" Non-CFC foam insulation—covers the sides and top of tank to
save energy by retarding loss of heat. Also increases jacket rigidity.
■ Factory installed nipples—for longer water heater life. Easier
installation.
■ Fully automatic controls—fast acting surface-mount thermostat
for automatic temperature control. Factory installed sensitive
manual reset energy cut-off for safety to prevent overheating.
■ Vitraglas
®
lining—Bradford White water heater tanks are protected
from the corrosive effects of hot water by an exclusive ceramic
porcelain-like coating. The Bradford White high silica Vitraglas
®
lining provides a tough interior surface for our hot water tanks.
■ Protective magnesium anode rod—provides added protection
against corrosion for long trouble-free service.
■ Factory installed Hydrojet
®
Total Performance System—cold
inlet sediment reducing device. Helps to minimize sediment build
up in tank. Increases first hour delivery of hot water while
minimizing temperature build up at top of tank.
■ Heat exchanger – UltraCoil
®
Heat Transfer System—
dielectrically isolated, double wall type consisting of a highly
conductive material with an NSF approved cross linked
polyethylene (PEX) coating. Also, incorporates two monofilament
channels between the walls for leak detection purposes. Leak
detection hole is located at top of unit on both heat exchanger
connections.
■ Stand-by heat loss—less than
1
⁄2°F per hour.
■ Brass drain valve.
■ T&P relief valve opening—all models feature top connection.
■ Ten year limited warranty on steel tank and heat exchanger—
heavy gauge steel automatically formed, rolled and welded to
assure a continuous seam for glass lining.
■ Six year limited warranty on parts.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385;
6,684,821; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165;
5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983;
4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968;
4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS
PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832;
2,045,862; 2,112,515; 2,108,186; 2,107,012.
STAND ARD
9001

Summary of content (2 pages)