Spec Sheet
Residential Energy Saver
CombiCor
®
Direct Fired
Gas Water Heater System
Features:
Bradford White is ISO registered to the
9001 standard.
■ 2" Non-CFC foam insulation—surrounds the tank surface, saving energy by
retarding loss of heat.
■ Factory installed nipples—for longer water heater life. Easier installation.
■ Fully automatic controls—built-in energy cut-off switch prevents abnormally
high water temperature for extra safety. Built-in gas pressure regulation.
■ Anti-scald device—supplied with unit to help prevent injury due to scalding.
■ Vitraglas
®
lining—Bradford White water heater tanks are protected from the
corrosive effects of hot water by an exclusive ceramic porcelain-like coating.
The Bradford White high silica Vitraglas
®
lining provides a tough interior surface
for our hot water tanks.
■ Protective magnesium anode rod—provides added protection against
corrosion for long trouble-free service.
■ Flue baffle—designed to maximize the amount of heat absorbed in the lower
portion of tank. Reduces air movement in the heater during standby periods to
retard heat loss up the flue.
■ Factory installed Hydrojet
®
Total Performance System—cold inlet sediment
reducing device. Helps prevent sediment build up in tank. Increases first hour
delivery of hot water while minimizing temperature build up at top of tank.
■ Heat exchanger – UltraCoil
®
Heat Transfer System—dielectrically isolated,
double wall type consisting of a highly conductive material with an NSF
approved high density coating. Also, incorporates two monofilament channels
between the walls for leak detection purposes. Leak detection hole is located at
top of unit on both heat exchanger connections.
■ Brass drain valve.
■ T&P relief valve—installed.
■ Ten year limited warranty on steel tank and heat exchanger.
■ Six year limited warranty on parts.
■ Design certified by CSA International (formerly AGA/CGA).
The Bradford White Defender Safety System™ Models (50 Gallon Model)
Features:
■ Piezo Igniter—easy and quick lighting of the pilot burner by push button.
■ Advanced ScreenLok
™
Technology Flame Arrestor Design
■ Resettable Thermal Switch—proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of the
combustion chamber or restricted air flow.
■ Pedestal Base—Rugged and durable base allows easy transport and
positioning, corrosion resistant contact with floor.
■ Maintenance Free—No regular cleaning of air inlet openings or flame arrestor is
required under normal conditions.
■ Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385;
6,684,821; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165;
5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983;
4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968;
4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS
PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832;
2,045,862; 2,112,515; 2,108,186; 2,107,012.
STANDARD
9001
EFFICIENCY
RATING
CERTIFIED
Photo is of M2-C-504T10FBN