Spec Sheet
Commercial Immersion and Surface Mounted
Electric Water Heater
The Immersion and Surface Mounted Electric Models Feature:
■ Fully Automatic Controls—Designed to provide outlet water at a
thermostatically controlled temperature greater than 180°F (82°C).
OR
Immersion Thermostats—Designed to provide outlet water at a
thermostatically controlled temperature greater than 180°F (82°C). (Be sure to
specify “CF” in model number nomenclature for immersion thermostats.)
■ Insulation System—3" (76mm) Non-CFC foam insulation covers the sides
and top of tank, reducing the amount of heat loss. This results in less energy
consumption, improved operation efficiencies and jacket rigidity.
■ Factory Installed Hydrojet
®
Sediment Reduction System—Cold water
inlet sediment reducing device helps prevent sediment build up in the tank.
■ Vitraglas
®
Lining—An exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas
®
) is fused to the steel surface by firing at a temperature of
over 1600°F (871°C).
■ Water Connections—1
1
⁄2" (38mm) NPT factory-installed true dielectric fittings
extend water heater life and simplify water line connections.
■ Elements—Screw in style. Surface mounted thermostat models have
elements made of nickel chromium wire embedded in magnesium oxide,
sheathed in copper and electroplated to minimize degradation of the anode.
Incoloy sheathed elements are optional (Incoloy elements are standard for all
600 volt models). Immersion thermostat models have low watt density incoloy
sheathed elements standard which resists burnout caused by dry fire or lime
buildup.
■ Two Protective Magnesium Anode Rods—Provide added protection
against corrosion for long-term, trouble-free service.
■ Hand Hole Cleanout—Allows inspection of tank interior and facilitates the
removal of sediment deposits.
■ ASME Construction Available.
■ NSF Construction Available.
■ Low Restrictive Brass Drain Valve—Durable tamper proof design.
■ T&P Relief Valve—Installed.
■ Completely Pre-wired—With pressure lug terminal block eliminating need for
splicing or taping of wires.
■ Voltages Available—208v, 240v, 277v, 380v, 415v, 480v and 600v.
Photo is of
M-II-50-kW-3SF
3 or 5-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;
6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984;
8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS:
2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
401/402B-1117-A