Spec Sheet
6 or 10-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
ScreenLok
®
and Vitraglas
®
are registered trademarks of Bradford White
®
Corporation.
110-B 0213
Photo is of
M-I-MH30T6FLX
Residential Manufactured Home Atmospheric Vent
Energy Saver Gas Water Heater
The Manufactured Home FVIR Defender Safety System
®
Models Feature:
■ Advanced ScreenLok
®
Technology Flame Arrestor Design—Flame
arrestor is designed to prevent ignition of flammable vapor outside of the
water heater.
■ Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of
the combustion chamber or restricted air flow.
■ Piezo Igniter—Easy and quick lighting of the pilot burner by push button.
■ Pedestal Base—Rugged and durable base allows easy transport and
positioning, while providing corrosion resistant contact with floor.
■ Maintenance Free—No regular cleaning of air inlet openings or flame arrestor
is required under normal conditions.
■ Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
■ Housing and Urban Development—This water heater is designed in
accordance with H.U.D. and is certified for installation in a manufactured
home(mobile home) only and must be installed in an enclosure that will
completely separate the water heater combustion and venting system from the
dwelling interior.
■ Roof Jack Kit—Ordered separately and includes a roof jack kit and hardware.
Must specify roof jack size when ordering. Available in 12", 18"/32", 32"/60",
or 48"/95" lengths.
■ Vitraglas
®
Lining—Bradford White tanks are lined with an exclusively
engineered enamel formula that provides superior tank protection from the
highly corrosive effects of hot water. This formula (Vitraglas
®
) is fused to the
steel surface by firing at a temperature of over 1600°F (871°C).
■ Fully Automatic Controls—Automatic temperature selection at your
fingertips. Built-in energy cut-off switch prevents abnormally high water
temperature for extra safety. Built-in gas pressure regulation.
■ Convertible Gas Control—Easily convertible control for use with either
Propane or Natural Gas.
■ 1" Non-CFC Foam Insulation—Covers the side and top of tank, saving
energy by retarding loss of heat.
■ Water Connections—3⁄4" NPT factory installed true dielectric fittings extend
water heater life and eases installation.
■ Heat Trap—Installed on hot water outlet to minimize heat loss through piping.
■ Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
■ 3"x4" “Snap Lock” Draft Diverter—Allows either 3" or 4" vent connections
with inputs of 40,000 BTU/Hr. or less.
■ Flue Baffle—Maximizes the amount of heat absorbed by the tank and
reduces heat loss during standby periods.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
■ T&P Relief Valve—Included.
■ Low Restriction Brass Drain Valve—Durable tamper proof design.
■ Design Certified by CSA International (formerly AGA/CGA).
FEATURING: