Spec Sheet

Residential Warranty: 6 or 10 Year Limited Tank Warranty / 1 Year Parts Warranty.
Commercial Warranty: 3 or 5 Year Limited Tank Warranty / 1 Year Parts Warranty.
For more information on warranty, please visit www.bradfordwhite.com
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821;
6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117;
7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186;
2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
EX200-0422
Electric Upright Water Heater
The Electric Upright Models feature:
Bradford White is ISO registered to the 9001-2008 standard.
UL-174 and IEC Certified.
Factory Installed Hydrojet
®
Total Performance System—Sediment
reducing device that also increases first hour delivery of hot water while
minimizing temperature build-up in tank.
Vitraglas
®
Lining—An exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas
®
) is fused to the steel surface by firing at a temperature of
over 1600°F (871°C).
Direct Heat Transfer With Immersed Elements—Transfers heat directly
and efficiently to the water. Screw-in style.
Fully Automatic Thermostat Controls—Fast acting surface-mount
thermostat with high limit energy cut-off (manual reset) for safety.
Non-Simultaneous and Simultaneous Operation Available— Non-
Simultaneous operation (standard) indicates one element at a time is
operating. Simultaneous operation indicates both elements (if equipped) may
operate at the same time.
Single Phase or Three Phase Operation Available—277V may only be
wired for single phase operation.
Protective Anode Rod—Provides added protection against corrosion for
long-term, trouble-free service.
Insulation System—1" (25mm) Non-CFC foam insulation covers the
sides and top of the tank, reducing heat loss. This results in less energy
consumption, improved efficiencies, and jacket rigidity. M-2-80R6DS and
M-II-120R has 2" (51mm).
Water Connections— 3⁄4" (19mm) NPT factory-installed true dielectric
fittings extend water heater life and simplify water line connections. M-II-120R
has 1" (25mm) NPT dielectric waterway fittings.
Steel Tank—Heavy gauge steel automatically formed, rolled and welded to
assure a continuous seam for glass lining.
T&P Relief Valve—Included. All models have special tapping on top of tank.
Low Restriction Brass Drain Valve—Durable tamper proof design.
Suitable for residential and light duty commercial applications.
Copper Screw Type Immersion Element
(INCOLOY
©
type immersion element available upon request)
Photo is of
M-I-65R6DS

Summary of content (2 pages)