Spec Sheet

Residential Utility
Energy Saver Electric Water Heater
The Utility Electric Models Feature:
■ DOE—All residential storage models above 20 gallon capacity meet or
exceed efficiency requirements of the Department of Energy. ASHRAE
Standard 90.1 b (current standard) and the National Appliance Energy
Conservation Act of 1987 recent amendment effective January 20, 2004
which supercedes all state and local efficiency requirements.
■ Fully Automatic Controls—Fast acting surface-mount thermostat for
automatic temperature control. Factory installed sensitive manual reset
energy cut-off for safety to prevent overheating.
■ Direct Heat Transfer With a Single Immersed Element—Transfers heat
directly and efficiently to the water. Screw-in style element.
■ Vitraglas
®
Lining—Bradford White tanks are lined with an exclusively
engineered enamel formula that provides superior tank protection from the
highly corrosive effects of hot water. This formula (Vitraglas
®
) is fused to the
steel surface by firing at a temperature of over 1600°F (871°C).
■ 1" Non-CFC Foam Insulation—Covers the sides and top of the tank,
reducing the amount of heat loss. This results in less energy consumption,
improved operation efficiencies and jacket rigidity.
■ Water Connections—3/4" NPT factory installed true dielectric fittings
extend water heater life and eases installation. Located on the side for
easier installation.
■ Alternate Top Water Connections—The 6 and 12 gallon models have
alternate 3/4" water connection tappings on top.
■ Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
■ Voltages Available—120V, 208V, 240V, 277V, 480V.
■ Single Phase Operation Only.
■ T&P Relief Valve Included—All models have special tapping on side
of tank.
■ Design evaluated by ETL in accordance with Part 280.707(d) of HUD
Mobile Home Construction and Safety Standards for Energy Efficiency.
Photo is of
M-1-12UT6SS
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Vitraglas
®
is a registered trademark of Bradford White
®
Corporation.
205-B-0213-A
Copper Screw Type Immersion Element
(Incoloy type immersion element available upon request)
6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.