Spec Sheet
NATURAL GAS AND LIQUID PROPANE GAS
Manufactured Home Energy Saver Models
Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
76% Recovery Efficiency
Model
Number
Approx.
Shipping
Weight
lbs.
E
Floor to
Gas
Conn.
in.
A
Floor to
Top of
Heater
in.
B
Jacket
Dia.
in.
U.S.
Gal.
Capacity Recovery*
90°F Rise
M-I-MS30T6LX
M-I-MS40T6LX
30
40
Imp.
Gal.
26
33
Nat.
BTU/Hr.
Input
30,000
30,000
Nat.
U.S.
GPH
31
31
Nat.
Imp.
GPH
26
26
LP
U.S.
GPH
31
31
LP
Imp.
GPH
26
26
106
126
16
18
C
Vent
Size
in.
3
3
57
3
/
8
57
7
/
8
13
3
/
4
13
3
/
4
58
3
/
8
58
7
/
8
50
50
G
Floor to
Hot Water
Conn.
in.
D
Floor to
T&P
Conn.
in.
Model
Number
Approx.
Shipping
Weight
kg.
E
Floor to
Gas
Conn.
mm.
A
Floor to
Top of
Heater
mm.
B
Jacket
Dia.
mm.
Liters
Capacity Recovery*
50°C Rise
M-I-MS30T6LX
M-I-MS40T6LX
114
151
Nat.
kW
Input
8.8
8.8
LP
BTU/Hr.
Input
30,000
30,000
LP
kW
Input
8.8
8.8
Nat.
Liters/
Hour
117
117
LP
Liters/
Hour
-
-
48
55
406
457
C
Vent
Size
mm.
76
76
1457
1470
349
349
F
Floor to
Cold Water
Conn.
in.
22
1
/
2
22
1
/
2
F
Floor to
Cold Water
Conn.
mm.
572
572
1483
1485
1270
1270
G
Floor to
Hot Water
Conn.
mm.
D
Floor to
T&P
Conn.
mm.
Residential Direct Vent Gas Water Heater
To order Natural Gas heaters change “X” to “N”.
For 10 year models, change suffix from “6” to “10”.
* Based on manufacturers rated recovery efficiency.
Printed in U.S.A.
107-B-0213-A
©2013, Bradford White Corporation. All rights reserved.
Ambler, PA
For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931
●
Fax 215-641-1670 / Technical Support 800-334-3393
●
Fax 269-795-1089
●
Warranty 800-531-2111
●
Fax 269-795-1089
International: Telephone 215-641-9400
●
Telefax 215-641-9750 / www.bradfordwhite.com
Sales / Technical Support 866-690-0961 / 905-238-0100
●
Fax 905-238-0105 / www.bradfordwhite.com
A
G
D
E
F
C
This water heater is of the closed combustion type (direct venting) for
mobile home applications only, where all combustion air is supplied from
the outdoors through the air intake and all combusted gas products are
vented directly to the outside by means of the roof jack. No draft diverter
(vent hood) is required for this water heater. The ETL listing of this water
heater includes the field installation of the following components: roof
jack, roof jack clamp, air intake, air intake seal and heater tie down
materials. These components for field installation are shipped with the
heater in a separate box and must be installed according to instructions.
No other components are approved for use with the water heater. The
water heater must be installed in accordance with The Federal Mobile
Home Construction and Safety Standard or in the absence of such
standard, The Standard for Mobile Homes (ANSI/NFPA No. 601B-1977)
General
All gas water heaters are certified at 300 PSI (2068 kPa) test pressure and 150 PSI (1034 kPa) working pressure.
All water connections are 3⁄4" NPT (19mm), all gas connections are 1⁄2" (13mm).
All models design certified by CSA International (formerly AGA/CGA), ANSI Z-21.10.1 and peak performance rated.
Designed in accordance with the H.U.D. Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280.707 (d)(2) for energy efficiency.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing
heating system or component(s) previously used with a non-potable water heating appliance.
Optional Roof Jack Kits
Part Number
12
"
18
"
/ 32
"
32
"
/ 60
"
48
"
/ 90
"
239-37022-01
239-37022-02
239-37022-03
239-37022-04
A
15"
33
1
/
2
"
32
1
/
2
"-62
1
/
2
"
50"-98
1
/
2
"
B
Through The Roof
Clearance
16"-33"
33
1
/
2
"-66"
37
1
/
2
"-74"
54
1
/
2
"-109
1
/
2
"
(Includes: roof jack, hardware, air intake, instructions).
B
22.5° Max.
A
11
5
/
8
"
Square
6
1
/
2
"
7"
4"
5"
3"
9"
B