Installation / Operation Instruction Manual

8
Water Connections continued-
This water heater can deliver scalding temperature water at any faucet in the
system. Be careful whenever using hot water to avoid scalding injury. Certain
appliances, such as dishwashers and automatic clothes washers, may
require increased temperature water. By setting the thermostat on this water
heater to obtain increased temperature water required by these appliances,
you may create the potential for scald injury. To protect against injury, you
should install an ASSE approved mixing valve in the water system. This valve
will reduce point of discharge temperature by mixing cold and hot water in
branch supply lines. Such valves are available from the manufacturer listed
on the rating plate or from your local plumbing supplier. Please consult with a
plumbing professional.
APPROXIMATE TIME/TEMPERATURE RELATIONSHIPS IN SCALDS
120°F (49°C)
More than 5 minutes
125°F (52°C)
1½ to 2 minutes
130°F (54°C)
About 30 seconds
135°F (57°C)
About 10 seconds
140°F (60°C)
Less than 5 seconds
145°F (63°C)
Less than 3 seconds
150°F (66°C)
About 1½ seconds
155°F (68°C)
About 1 second
CAUTION
INCREASING THE THERMOSTAT SETTING ABOVE THE PRESET
TEMPERATURE MAY CAUSE SEVERE BURNS AND CONSUME
EXCESSIVE ENERGY. HOTTER WATER INCREASES THE RISK OF
SCALD INJURY.
(52°C) can cause severe burns
are at highest risk of being
Children, disabled and elderly
instantly or death from scalds.
Water temperature over 125°F
Feel water before bathing or
before setting
temperature
available.
showering.
Temperature limiting valves are
Review this instruction manual
at water heater.
scalded.