Spec Sheet
The Light Duty Upright Electric Models Feature:
■ Fully Automatic Controls—Fast acting surface-mount thermostats for
automatic temperature control. Factory installed sensitive manual reset
energy cutoff for safety to prevent overheating (Maximum thermostat
setting is 160°F.).
■ Direct Heat Transfer With Immersed Elements—Transfers heat directly
and efficiently to the water. Screw-in style.
■ Factory Installed Hydrojet
®
Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank. Increases
first hour delivery of hot water while minimizing temperature build up in tank.
■ Vitraglas
®
Lining—Bradford White tanks are lined with an exclusively
engineered enamel formula that provides superior tank protection from the
highly corrosive effects of hot water. This formula (Vitraglas
®
) is fused to the
steel surface by firing at a temperature of over 1600°F (871°C).
■ 2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity.
■ Water Connections—3⁄4" NPT factory installed true dielectric fittings
extend water heater life and eases installation (LD-120R has 1" NPT
dielectric waterway fittings).
■ Factory Installed Heat Traps —Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation
(Except LD-120R).
■ Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
■ Field Convertible—Units are shipped from factory Three Phase,
Non-Simultaneous (120V and 277V are shipped Single Phase,
Non-Simultaneous). All models can be converted to Single Phase and/or
Simultaneous operation in the field.
■ Voltages Available—120V, 208V, 240V, 277V, 480V.
■ T&P Relief Valve Installed—All models have special tapping on top
of tank.
■ Low Restriction Brass Drain Valve—Durable tamper proof design.
Photo is of
LD-50S3-3
Copper Screw Type Immersion Element
(Incoloy type immersion element available upon request)
Light Duty Commercial Upright
Energy Saver Electric Water Heater
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;
6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984;
8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS:
2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
410-B 1213
3 or 5-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.