Spec Sheet
Residential PowerStor2
™
Series
Double-Wall Indirect Water Heater
The PowerStor2
™
Series Double-Wall Models feature:
n Heat Exchanger—Double wall 1
1
⁄2" (38mm) O.D. glass coated (Vitraglas
®
)
steel coil. The positive leak path between the two walls of the coil ensures
the potable water will stay separate from the hydronic fluid.
n Low Heat Exchanger Head Loss—Up to 10 GPM (38L) flow, with less
than 5 ft. (1.5m) of head loss. Greatly reduces the required pump size for
heat exchange.
n Factory installed Hydrojet
®
Total Performance System—Sediment
reducing device that also increases first hour delivery of hot water while
minimizing temperature build-up in tank.
n Vitraglas
®
Lining—An exclusively engineered enamel formula that
provides superior tank protection from the highly corrosive effects of hot
water. This formula (Vitraglas
®
) is fused to the steel surface by firing at a
temperature of over 1600°F (871°C).
n Fully Automatic Thermostat Controls—Fast acting surface-mount
thermostat for automatic temperature control.
n Supply and Return Connections—The 3/4" (19mm) NPT female
connections are located on the front for both the boiler supply and boiler
return.
n Insulation System—2" (51mm) Non-CFC foam insulation covers the
sides and top of the tank, reducing heat loss. This results in less energy
consumption, improved efficiencies, and jacket rigidity.
n Potable Water Connections—3/4" (19mm) NPT factory installed true
dielectric fittings extend water heater life and eases installation.
n Two Protective Anode Rods—Provide added protection against
corrosion for long trouble-free service.
n Steel Tank—Heavy gauge steel automatically formed, rolled and welded
to assure a continuous seam for glass lining.
n T&P Relief Valve—Included.
n Low Restriction Brass Drain Valve—Durable tamper proof design.
n AHRI Certified—These water heaters are rated by the Air-Conditioning,
Heating, and Refrigeration Institute to provide accurate performance
data within the standards of the certification. This certification provides a
recognized standard for proper comparison of hydronic appliances.
Photo is of
DW-2-50-L
Limited Lifetime Tank and Heat Exchanger Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419;
7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379;
7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515;
2,476,685; 2,239,007; 2,092,105; 2,107,012. PowerStor2
™
Series
®
, Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
543-G-0322