Solid Vent Kit Install Instructions

3
IMPORTANT – Refer to parts list in the back of this manual
and become familiar with the parts named in kit.
The co-axial vent-air intake tubes of this water heater can be installed in any
360° configuration as long as the proper clearances for installation,
plumbing, operation and servicing are maintained. (See Figure 2).
Figure 2
Note: Maintain proper clearances for installation, plumbing, operation
and service.
SOLID VENT KIT INSTALLATION
WARNING
The vent-air intake system must be properly installed. Failure to properly
install the vent-air intake system could result in property damage,
personal injury or death.
DO NOT install any damaged vent-air intake system components.
Contact the manufacturer of the water heater for replacement parts.
WARNING
The vent-air intake terminal must be installed through an outside wall in a horizontal
position. This direct vent water heater is not designed for through the roof vertical
venting.