Product Overview

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
650-B 1212
Residential AERO
®
Series
Energy Saver Oil-Powered Water Heater
AERO
®
Series Models Feature:
■ High Recovery Rates—Oil heats water 3 to 4 times faster than other
methods. These models are designed to assure a constant supply of hot water
provided the draw-off rate is within the recovery capacity of the unit. Center
flue models from 32 to 50 gallons capacity delivery recovery rates as high as
110 gallons per hour. Rear flue models are designed for heavier demand with
recovery rates as high as 195 gallons per hour.
■ Installation—Occupies relatively little floor space and does not require a
separate fuel oil storage tank when used in an oil-heated residence.
■ Factory Installed Hydrojet
®
Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank. Increases
first hour delivery of hot water while minimizing temperature build up at top of
tank (Center Flue models only).
■ Vitraglas
®
Lining—Bradford White tanks are lined with a exclusively
engineered enamel formula that provides superior protection from the highly
corrosive effects of hot water. This formula (Vitraglas
®
) is fused to the steel
surface by firing at a temperature of over 1600ºF.
■ Controls—Single immersion aquastat (supplied with burner) for precise, easy
water temperature regulation and safety.
■ Carlin Burners—All burners are 120V, 1-stage with multiple firing rates (see
reverse side for part numbers). Beckett and Riello are optional burners, but not
available through Bradford White.
■ Carlin Burners are Compatible with Biofuel—Up to B5
(5% Biofuel) can be used with water heater, provided the Biofuel meets
ASTM D6751.
■ 1" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity.
■ Fiberglass Insulation—High density fiberglass insulation provides a thick
blanket around tank and combustion chamber for more heat retention and
maximum fuel efficiency (Rear Flue models only).
■ Water Connections — 3/4" NPT factory installed true dielectric fittings extend
water heater life and eases installation (RF-50 has 1
1
⁄4" water connections).
■ Two Protective Magnesium Anode Rods—Provide added protection
against corrosion for long trouble-free service (Rear Flue models have one
Magnesium Anode Rod).
■ Flexible Stainless Steel Flue Baffle — Maximizes the amount of heat
absorbed by the tank and reduces heat loss during standby periods. Hinged
for low ceiling removal and cleaning (Center Flue models only).
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
■ Ceramic Fiber Combustion Chamber—Concentrates the flame for a
smaller, hotter fire and faster transfer of maximum heat.
■ T&P Relief Valve—valve is supplied for CF models and installed on RF
models .
■ Low Restriction Brass Drain Valve — Durable tamper proof design.
■ Design Certified by CSA International (formerly AGA and CGA).
Photo is of
CF-32-6
6-Year Limited Tank Warranties / 2-Year Limited Warranty on Parts and Burner.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.