Install Instructions

11
THE FOLLOWING INSTRUCTIONS ARE FOR INSTALLATION OF:
GAS WATER HEATERS SUITABLE FOR WATER (POTABLE)
HEATING AND SPACE HEATING
1. All water heaters are to be installed in accordance with local codes or, in the
absence of such, with CAN/CSA-B214 Installation code for hydronic heating
(latest edition).
2. All piping components connected to this water heater for space heating
applications must be suitable for use with potable water. In Massachusetts,
space heating piping length must not exceed 50 feet.
3. Toxic chemicals, such as those used for boiler treatment, must not be
introduced into potable water used for space heating.
4. This water heater must not be connected to an existing heating system or
component(s) previously used with a non-potable water heating appliance.
5. When the system requires water for space heating at temperatures higher
than required for other means, such as an ASSE approved mixing valve shall
be installed to temper the water for those uses in order to reduce the scald
hazard potential.
Figure 2 – Suggested piping arrangement
CAUTION
If your water heater is equipped with an internal double wall coil, refer to
the supplemental instructions supplied with this water heater for proper
installation.