Spec Sheet
Residential Power Vent Combi1
®
TTW
®
Gas Water Heater System
The Combi1
®
TTW
®
FVIR Defender Safety System
®
Models Feature
(50T model, only):
n Advanced ScreenLok
®
Technology Flame Arrestor Design—Flame arrestor
is designed to prevent ignition of flammable vapor outside of the water heater.
n Flammable Vapor Sensor—Electronic sensor prevents burner operation if
flammable vapors are detected. The sensor will also prevent operation if there is
ongoing flammable vapors burning inside the combustion chamber.
n Maintenance Free—Regular cleaning of air inlet openings or flame arrestor is
not required under normal conditions.
n Sight Window—Offers a view of the pilot and burner operation.
All Combi1
®
TTW
®
Models Feature
n Internal Single Wall Heat Exchanger—1
1
⁄2" (38mm) O.D. glass coated (Vitraglas
®
)
steel coil.
-- 1" (25mm) NPT Solar Collector Supply and Return Connections.
n Low Heat Exchanger Head Loss—Up to 10 GPM (38L) flow, with less than 5ft.
(1.5m) of head loss. Greatly reduces the required pump size for heat exchange.
n Bradford White ICON System
®
—Intelligent gas control with spark to pilot
ignition system eliminates the constant burning pilot. This results in savings of
pilot gas during stand by periods (120 VAC).
-- Enhanced Performance—Proprietary algorithms provide enhanced First Hour
Rating and tighter temperature differential.
-- Advanced Temperature Control System—Microprocessor constantly monitors
and controls burner operation to maintain accurate water temperature levels.
-- Intelligent Diagnostics—An exclusive green LED light prompts the installer
during start-up and provides ten different diagnostic codes to assist in
troubleshooting.
n Factory-Installed Hydrojet
®
Total Performance System—Sediment reducing
device that also increases first hour rating of hot water while minimizing
temperature build-up in tank.
n Vitraglas
®
Lining—An exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas
®
) is fused to the steel surface by firing at a temperature of over
1600°F (871°C).
n Horizontal and Vertical Venting—With 3" (76mm) or 4" (102mm) PVC, ABS or
CPVC (Maximum equivalent vent lengths on reverse side).
n Insulation System—2" (51mm) Non-CFC foam insulation covers the sides and
top of the tank, reducing heat loss. This results in less energy consumption,
improved efficiencies, and jacket rigidity.
n Pedestal Base.
n Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings
extend water heater life and simplify water line connections.
n Two Protective Anode Rods.
n T&P Relief Valve—Installed.
n Low Restrictive Brass Drain Valve—Durable tamper proof design.
n Thermostatic Mixing Valve (ASSE Approved)—Included.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419;
7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379;
7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515;
2,476,685; 2,239,007; 2,092,105; 2,107,012. Defender Safety System
®
, ScreenLok
®
, TTW
®
, Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
542-G-0122
10-Year Limited Tank and Heat Exchanger Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
Photo is of
C-SW2-TW50T10FBN
FEATURING: