Spec Sheet
Residential Atmospheric Vent Combi1
®
Gas Water Heater System
10-Year Limited Tank and Heat Exchanger Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
Photo is of
C-SW2-75T10BN
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821;
6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117;
7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186;
2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
C548-G-0422 CANADA
FEATURING:
The Combi1
®
Models Feature:
n Bradford White ICON System
®
—Intelligent gas control with proven millivolt
powered technology and built-in piezo igniter. A standard, off the shelf
thermopile converts heat energy from the pilot flame into electrical energy to
operate the gas valve and microprocessor. No need for external electricity.
-- Enhanced Performance—Proprietary algorithms provide enhanced First
Hour Rating and tighter temperature differential.
-- Advanced Temperature Control System—Microprocessor constantly
monitors and controls burner operation to maintain consistent and accurate
water temperature levels.
-- Intelligent Diagnostics—An exclusive green LED light prompts the installer
during start-up and provides ten different diagnostic codes to assist in
troubleshooting.
-- Pilot On Indication—Flashing green LED provides positive indication that
pilot is on.
-- Separate Immersed Thermowell—Durable copper thermowell and brass
shank provides isolation between electric temperature sensor and surrounding
water.
n Internal Single Wall Heat Exchanger—Single wall 1
1
⁄2" (38mm) O.D. glass
coated (Vitraglas
®
) carbon steel coil.
-- 1" (25mm) NPT Front Supply and Return Connections.
-- Low Heat Exchanger Head Loss—Up to 10 GPM (38LPM) (flow, with less
than 5 ft. (1.5m) of head loss). Greatly reduces the required pump size for heat
exchange.
n Factory Installed Hydrojet
®
Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank. Increases
first hour delivery of hot water while minimizing temperature build up in tank.
n Vitraglas
®
Lining—An exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas
®
) is fused to the steel surface by firing at a temperature of over
1600°F (871°C).
n Insulation System—2" (51mm) Non-CFC foam insulation covers the sides and
top of the tank, reducing heat loss. This results in less energy consumption,
improved efficiencies, and jacket rigidity.
n Pedestal Base.
n Water Connections—3⁄4" (19mm) NPT factory installed true dielectric fittings.
n Two Protective Anode Rods.
n T&P Relief Valve—Installed.
n Low Restrictive Brass Drain Valve—Durable tamper proof design.
n Thermostatic Mixing Valve (ASSE Approved)—Included.