User Manual

Page 12
B RADFORD W HITE
Page 40
B RADFORD W HITE
8.7 Con guration Sub-Menus (ALL)
Menu 18. Home Screen
To navigate to the Con guration Menu Screen,  rst touch
the controller icon on the home screen to access the Status
Summary screen,
Menu 19. Status Summary Screen
From the Status Summary Screen, touch the ‘Con gure’ button
on the bottom left, to access the Con guration Menu.
Menu 20. Con guration Menu
8.7.1 thru 8.7.15 are the
Con guration Sub-Menus.
8.7.1 System Identi cation & Access
This sub-menu will display information regarding software,
date codes, model numbers and program name, as well as
giving the installer access to re-name the boiler and to change
the modbus addresses for lead lag operation.
8.7.2 CH - Central Heat Con guration
When using the Brute for hydronic heating, a call for heat
must be supplied to the “T-T” terminals found on TB7 labeled
“T-T or Interlock”. Once a call for heat is established, the
control will start the appropriate (selected) pumps, and begin
the ignition process. From the “Home” screen touch the
Sola icon, then press “Con gure”. Choose ‘CH-Central Heat
Con guration to make adjustments to setpoint, and modulation
for a single boiler CH demand.
8.7.3 Outdoor Reset Con guration
Description of Outdoor Sensor