Installation / Operation Instruction Manual

Page 62
B
RADFORD
W
HITE
8.G.9 Statistics Conguration
The statistics conguration sub-menu allows the
installer to view Burner Cycles, Burner Run Time, DHW
Pump Cycles, Boiler Pump Cycles, and System Pump
Cycles.
This sub-menu is ‘Read-Only’
8.G.10 High Limits
The outlet High limit can be adjusted using the installer
password. After a change is made, the control will
lockout and require a Safety Verication (see Section
8.3 for more details on Safety Verication).
8.G.11 Stack Limits
8.G.12 Anti-Condensation Conguration
Anti-condensation (frost protection) is enabled/disabled
on this screen
8.G.13 Frost Protection
Frost protection will assist in keeping the unit from
freezing when the unit is not able to re, but is still
able to run the pumps. The frost overrun time can be
changed on this screen.
8.G.14 System Conguration
The installer can set the control to display
temperature units in °F or °C, can adjust the anti
short -cycle time, the low re cuto󰀨 time, burner
o󰀨 inhibit time, and can set the time allowed for an
alarm to sound before being silenced.