User Manual

Page 1
Brute BOILERS AND VOLUME WATER HEATERS
FAMILIARIZING YOURSELF TO THE
Brute
TM
Shown without front, top and side panels.
Sizes available are 150-850 MBTU/h. This illustration is of the 150 MBTU/h
For complete details to all sizes and dimensions, please refer to the Brute Install and Operating Manual, Doc #1344
Outdoor Model
Shown without back panel.
(has all piping connections in
the BACK)
(has all piping connections
on the TOP)
Indoor Model
AIR PRESSURE
SWITCH
AIR INLET CONNECTION
EXHAUST VENT
CONNECTION
GAS
CONNECTION
GAS
CONNECTION
TOUCHSCREEN
HEAT
EXCHANGER
VENTURI
AIR/ GAS
BLOWER
PRESSURE
RELIEF VALVE
WATER INLET
WATER OUTLET
AIR INLET
FILTER BOX
DRAIN VALVE
CONDENSATE TRAP
GAS VALVE
ON / OFF
SWITCH
The Bradford White Brute is offered in both Indoor and
Outdoor models for all sizes, as both Boiler and Volume Water
Heater. The appearance of the Indoor and Outdoor Brutes is
drastically different as the Outdoor model has a weathertight
door that covers the entire front of the unit. This weathertight
door must be unlatched, lifted off, and set aside for all
adjustments and servicing.
The only component and interior difference between the
Indoor and Outdoor models is that all of the piping for the
Outdoor model, with the exception of the Exhaust Vent, is at
the BACK of the unit. See Figure 1
The gas connection, the air inlet, and the water inlet and
outlet are all at the back of the outdoor unit. This is consistant
for all sizes.