Installation / Operation Instruction Manual

BLP SERIES Install, Operation, and Maintenance Manual
SECTION 3: OPERATION AND CONTROLS
Rev-1 Bradford White • 200 Lafayette St. • Middleville, MI 49333 Page 30 of 83
BrutePlate Manual Phone: [phone] • Website: www.BradfordWhite.com 02/26/2020
other protocols.
3.9.1 PID Controller Overview
This section shows the description of the display and button functions of the controller, which
may be required for backup interface when HMI is being replaced or repaired.
General Description of Operator Buttons:
Temperature Controller has six buttons (four navigation and two function) available as shown in
following button layout:
Button Operation
 Raise: The raise button increments parameter values to limits.
 Lower: The lower button decrements parameter values to limits.
 Page: In Operator levels 1 or 2, the Page button will select between the Home display or
the Programmer Edit and Run lists (if one of the programmer features is enabled).