Installation / Operation Instruction Manual

BLP SERIES Install, Operation, and Maintenance Manual
SECTION 3: OPERATION AND CONTROLS
Rev-1 Bradford White • 200 Lafayette St. • Middleville, MI 49333 Page 41 of 83
BrutePlate Manual Phone: [phone] • Website: www.BradfordWhite.com 02/26/2020
13. Click on scroll button and you will see “mAIN” screen:
14. Click on raise button to select , then click on scroll button ,
and you will see (Auto-discovery mode):
*Default is OFF.
15. Click on to move to the IP.MODE. Use arrow button to switch the mode:
a. is static mode – IP, Gateway, Subnet masks shall be manually setup
b. is DHCP mode – DHCP server shall be setup to assign IP, etc.