Installation / Operation Instruction Manual

BLP SERIES Install, Operation, and Maintenance Manual
SECTION 2: INSTALLATION INSTRUCTIONS
Rev-1 Bradford White • 200 Lafayette St. • Middleville, MI 49333 Page 12 of 83
BrutePlate Manual Phone: [phone] • Website: www.BradfordWhite.com 02/26/2020
2.3 INSTALLATION CLEARANCES AND UNIT DIMENSIONS
The BLP Series minimum acceptable clearances are shown in Figure 2-1 and dimensions are
shown in Figure 2-2a and 2-2b. The minimum clearance dimensions are indicated in the
drawings. However, if local building codes require additional clearances, the local building
codes shall supersede these requirements.
All water piping and electrical conduit or cable must be arranged so that they do not interfere
with the removal of any panels, or inhibit service or maintenance of the unit.
FIGURE 2-1: BLP Series Installation Clearance Drawing