Operator`s manual

PRE-DELIVERY CHECKLIST

6784

1-15-96

GENERAL INFORMATION

The following is a list of areas that should be inspected by the dealer prior to

delivery of the backhoe to the customer. The customer should check the list and

make sure that the dealer has completed the inspection. Completion of this check

list will help insure that the customer receives the backhoe in complete working

order, ready to install.

PRE-DELIVERY CHECKLIST - CHECK AND ADJUST AS NECESSARY

1. _____ Check the hydraulic system for correct hydraulic fluid level.

2. _____ Check and lubricate backhoe if necessary. See "Lubrication", Sec-

tion H.

3. _____ Visually inspect the backhoe for bent, loose, cracked, damaged or

missing parts. Check for any other irregularities.

4. _____ Remove paint from finished (chrome) surfaces of cylinders and valve

spools.

5. _____ Backhoe control levers function and direction of operation are in

accordance with the control lever decals.

6. _____ Run cylinders through their full cycle to purge any air from the system.

7. _____ Check all hydraulic connections for leaks and all hoses for proper

positioning to reduce chafing and binding.

8. _____ Check system relief valve pressure and compare and adjust to rec-

ommended operating pressure listed in the "Specifications". See

Section P.

9. _____ Check backhoe attachment bolts for tightness. Retighten after the

first eight working hours, and after every forty working hour interval

thereafter. See "Bolt Torque", Section O.

10. _____ Make sure decals are not damaged or missing and are in their right

location. See "Decals", Section Q.

11. _____ Complete and return the manufacturers "Warranty Validation Form"

and sign your dealership pre-delivery checklist.

12. _____ Operator to read the E.M.I. Loader/Backhoe safety manual provided

before operating backhoe.