User guide

3. Installation
3. INSTALLATION
About th e installation of the display
The next section describes how to install your MSMD-1119 or MSMD-1119-TS display. A first subsection
shows you how to quickly install your display for use on a desk, without IP protection requirements. The
second subsection explains a more detailed installation procedure with IP protection option, VESA arm
handle option and detailed cable routing description.
WARNING: Read all the important safety information before installing and operating
your MSMD-1119 or MSMD-1119-TS display. Please refer to t he dedicated chapter in this
user guide.
3.1 Qu ick installation pro cedu re
WARNING: The protection against ingress of water IP33 will be void when installing the
display according to this quick installation procedure. If this would be an issue, ple ase
follow the d etailed installation procedure which is described in the next section.
To quickly install the display
1. Fix the 4 rubber pads to the bottom of the stand.
2. Mount the display firmlytothestand/handleusing4M4x16mmscrews.
3. Route all cables through the oval cable gap in the stand.
4. Connect one or more video sources, then connect the power to the display.
1
2
Image 3-1
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013 7